Frostgrave: Ghost Archipelago – Freebooter’s Fate Amazons

In anticipation of Frostgrave: Ghost Archipelago, I’ve been browsing around for fun and appropriate miniatures I wouldn’t generally have a use for. Freebooter’s Fate came up in one of my searches; I was leaning pretty hard into the Amazons. Shipping them was going to be a pricey option and the shop I’m at doesn’t have any easier access than I do, so I did some research and lined up a couple destinations to hit up while I was in Toronto a couple weeks ago. They had most of what appealed to me in stock, so I spent some moneydollars and got me some Amazons.

First off, they come with interesting bases. Square plastic bases with a recess that holds a molded metal piece. I was originally planning to put these minis on round bases, but these looked interesting enough that I decided to give them a shot. Annoyingly, they stick out significantly as is, as they’re a little taller and wider than really fits in the recess. This might be intentional (I suppose I could have glued them in place and then used green stuff to bevel/fill the base edges), but I opted to trim and file them until they fit in nicely, generating a little more of a defined edge.

The first one I put together was Canita, who stands on one leg and has a sizable headdress of sorts. The mounting hole in the molded metal base piece was a little on the large side, so I had to green stuff her into place. Unfortunately she’s pretty top heavy, so I had to get creative to keep her aligned (she kept falling over when left vertical).

Next up was a paired set which went pretty smoothly. I pinned the limbs (most of these Amazons are pretty slender, so the majority of these minis were pinned with staples) and the feet fit much more snugly into the base piece. Chicomeh and Matqueh complete.

The Atl-Atl pair is what things got frustrating again. The miniatures themselves are very clean, super minimal moldlines and almost zero flash. Unfortunately, every time a piece is attached to the ‘sprue’, it’s attached at a joint (you can see this in the initial Canita image as well). This means a whole mess of garbage metal in all the spots you desperately need to fit together cleanly. By the time I’d trimmed, filed, and cleaned a given part, I was left with some annoying gaps.

Given how many parts these are (Occepa is a *7 piece* miniature), this got old fast. Fortunately a lot of the pieces were arms, hair, and other forgiving joints, but it would have been far nicer to see the flash/sprue on the actual part, where I can clean and file it without obliterating crucial surfaces.

The end results generally looked great, but required a little more work to make fit properly than I think they should have. The arms had bumps and divots at the joints to allow for solid non-pinned connections, but then there’d be so much garbage metal burying the ‘bumps’ that it served zero real purpose anyway. I always ended up filing and pinning anyway.

Occepa is my personal favourite. She’s big and powerful, and wears armour made from a crocodile. But 7 pieces! Arrgh! Torso/legs, left arm (shield), right arm (hand weapon), hair, upper croc jaw, lower croc jaw, and croc tail.

Part of me was pretty tempted to paint some parts before assembling, but I ended up deciding that with this many finicky parts, I’d be better off putting everything together first, so I could be a little rougher during the process.

Painting is going to be a pain, but I’ll figure it out, no doubt. Lots of the trouble spots are going to be pretty hard to see, anyway. The tail and loincloth covers a lot, and the shield blocks much of her left side. Frustrating as I expect all aspects of this to be, though, I am super excited about it. I never realized I needed this miniature until I put it together, and now I want a dozen like it. It’s going to look great!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s