Thought I’d try some new options last night, and took a car, a bike, and a monster truck up against B’s truck and car. I brought a couple of rams and some perks; he brought turret-mounted rockets and HMGs.
Things got messy real fast. His pickup (Optimus) made a quick left to try and get away from my monster truck, but Wile E there gunned it over the car and slid into Optimus anyway (3 cheers for Hell for Leather).
The first half of the race was definitely going well for me. I was setting a solid pace and leaving Optimus and Ecto far behind. Probably should have been a lock but I made a couple of big errors that got me torn apart. The first was that I tried to put my car into too sharp a turn while in 4th gear; the Medium template B handed me in combination with a bad skid check left my car sliding right off the course.
A short while after that I forgot how fragile Bikes are and let myself wipe out in a high gear with only 2 bull points remaining. I had the shift dice available to drop into second, but didn’t think about that until after our already resolved everything. Sure enough, the Bike flipped and wrecked, leaving only poor Wile E to try and finish the race.
Unfortunately the track put him in range of Optimus right as the pickup cleared the first gate, and my poor Monster Truck was pummeled by rockets taking 5 damage, reducing him to 4 remaining hull points. I tried using audience votes to drown Optimus in hazards (he was a half inch from hitting a fence) but his Thunderous Applause cleared him completely, and I couldn’t get far enough away in time to prevent my taking another barrage of rocket fire.
Since it was just the two of us playing, we didn’t bother with respawns, and called the game in B’s favour since I was out of cars. Till next time!
I was so happy with the results of my Vallejo pigment experiment that I picked up an additional pigment (dark red ochre) to use with my next two cars, a Mazda RX-3 from the Hot Wheels ‘Japan Historics’ line, and a thrifted 65 Corvette convertible. I think they look great, but let’s spend some time seeing how each of them got to where they ended up.
Hot Wheels ‘Japan Historics’ Mazda RX-3.
This car actually cost money, sort of. Almost five bucks Canadian. Which is one of the things I’m loving about Gaslands. $5cdn is an *expensive* miniature. Hahaha. I’m not sure why, but this one called to me from the rack; there would be no leaving it behind.
It got some extra exhausts and armour plating from the good ol’ pile o’ orky bitz, plus a buzzsaw ram that looks like it probably came off a Nob. That’s just a regular piece of coated copper wire connecting it to the hood (same stuff I use for pinning, I’m still working through a roll that I got about 25 years ago while going through a ‘learning about electronics’ phase as a child). The plating on the front window is actually just plastic from the car’s blisterpack, with the ‘rivets’ pressed into it from the other side. I cut the passenger seat out (1 crew means this will be a performance car), mounted the heavy machine gun from the roof, and dropped a block of engine-looking mechanical goodness into the space where the rear window used to be.
Next I cut some viewslats into the ‘windshield’ (I meant to do that before mounting it, but I was excited and got ahead of my process, haha), and glued some window screen into the side windows for a welded wire cage effect. That came out better than I expected.
I painted up the interior (I didn’t prime the RX-3 interior as I didn’t originally plan to bother with it, and wow did paint ever bead up on it at first, haha…), even though it’s almost totally hidden away behind the plated windscreen and the cage windows; gives me a sense of completedness that I don’t think I would have otherwise. It was tempting to put a driver in, and I *do* have some at this point (more on those shortly), but they’re not exactly free so I think I’ll be saving them for convertibles and other ‘open’ projects.
Next I painted up the various bits and hit the original paint job with some Vallejo Matt Varnish (just so additional weathering would have a little more to stick to, rather than that super glossy enamel finish). Citadel Reikland Fleshshade washed over everything (especially the ‘metal’ parts) and things were starting to come together. At this point I finally got a real sense of what that windshield plating would look like, and it was pleasantly close to what I’d envisioned.
Weathering time! This time I had two distinct tones of pigment (Vallejo’s Brown Iron Oxide and Dark Red Ochre) so I worked up from brown to red and then added some dust with Citadel Agrellan Earth. Ready to hit the road!
The 1965 Corvette.
The Mazda was now ready for the Gaslands, but it wasn’t the only car in the garage that week. I was also putting together a 65 Corvette. I realize most corvettes are fiberglass so the heavy rusting isn’t necessarily a logical weathering process for this guy, but then I thought, ‘who cares?’ Grin. Seriously, though, If you were taking a Corvette out into the Gaslands for a demolition death rally every couple of weeks, you’d probably have had to replace the fiberglass pretty early, right? So that’s what I’m picturing. I think this guy came out of a 49c bucket at a Duluth Goodwill.
The Corvette got some fancy upgrades in the form of a turreted heavy machine gun and some significantly heavier rear wheels. Slicks don’t seem like they’d generally be a great option for the gaslands, so I found something that felt a little more offroad. Can’t remember what they came off of, but probably either heavy equipment or the Sting Rod II. For the turret effect I just did a long pinning that I didn’t fully glue and then game the car a similar treatment to the Mazda; some paint on the modified bits, a matt varnish, and then some Reikland wash.
This car is a convertible, which meant it was going to be super obvious that it lacked a driver, so I hit the internet looking for some solutions. I decided to try a couple options, and ordered a variety of 20mm drivers, gunners and riders from Stan Johansen (the magnificent Stan packed a few extras in as well!) and dug in. I actually used a gunner for this one, and bent him a little to turn his loose standing pose into a low profile seated position. Mostly I just needed to shift the arms and head a little.
I did much of the Corvette’s rusting before putting the windshield in so that it could get really crusty where the edge of the metal met it. I also lightly sponged (‘dry-sponged’?) some of the Agrellan Earth onto it and drilled a couple bullet holes. the spiderweb cracks were just scratched into the plastic with a blade. It wasn’t until after I’d put it all together that I realized that my driver was either pretty lucky, or not the first driver of this car.
These two cars come in at about 50 cans between them, so they’re pretty much a starting team on their own. I fielded them last week alongside a little Meyer’s Manx that I haven’t done anything to, yet, in terms of modifications. Soon, perhaps. See you in the gaslands!
In the interest of making sweet rusty post-apocalyptic death machines, I decided to pick up and try one of Vallejo’s pigments. Snagged brown oxide to start and just used it as a final coat on my Cobra Daytona, having used various reds and browns first and feeling like it just wasn’t crusty enough. The Cobra got primed and painted purple before I started with the rust effects, although it was probably not super necessary, given how much rust and dirt I put onto it.
This car was among my first real modifications. I’d already done a bunch of Gaslands cars (see my previous post) but most of those just involved gluing stuff to the exterior. For this one I drilled the rivets out so that I could get everything apart. I cut the passenger seat out of the interior and mounted the gun to the roof, and I used bolt cutters to trim the rear wheel wells, making them big enough to tuck the wheels from a Space Marine bike into them. The wheels got drilled a little off center so I could pin them into place without worrying about increasing the rear of the chassis to move the whole axle.
The ‘windscreen’ is a piece of a ladder, the wheel spikes are old skaven shield decorations, and the rest is mostly a hodge-podge of ork and imperial bits. My favourite is probably the tabard turned into driver’s side window shielding, but I haven’t had any luck finding more similar bits so far.
I cleaned up all the mold lines (probably could have done that pre-photo, but meh), and settled into the painting process. My favourite brush-on primer (take that, old man winter!), and then the car got a purple basecoat, with Vallejo Oily Steel on the ‘metal’ parts. A heavy wash of Citadel Reikland Fleshshade to give it its first rusty tinge, and then a few shades of deep dirty red (Vallejo Burnt Cadmium was the main one here). I painted up the interior while I had everything open, as I planned to enter this into the local shop’s Modern/SciFi miniature painting contest and wanted to cover all the little details just in case. I was feeling pretty good about it at this point, and was ready to get [c]rusty!
I just had the one pigment for this car, but got pretty liberal with it, leaving it pretty thick and dabbing it roughly into place with an old brush that will probably serve this purpose to the end of its days now. Finally, I added some dirt in the form of some inherited Citadel Agrellan Earth (?) technical paint.
I particularly like that armour plating on the passenger side.
Next I needed something to use as a base. Gaslands doesn’t require bases, but the aforementioned painting contest has basing points, so I put some cracked highway together. I broke up a piece of corkboard and glued it to a plastic sheet, then glued some sand into the gaps and painted it brown. The cork got a grey plus drybrush and my quick and dirty asphalt was practically complete. Thinking I’ll do up some bigger chunks to use as actual terrain, perhaps with the plastic extending out further so I can make a bevelled dirt zone on each side…
And voila! The Cobra Daytona is ready to rock the Gaslands!
I definitely liked working with the pigment, and have since purchased an additional one. Looking at these zoomed pictures I feel like my transitions could use some work, but I think part of that is just having the one pigment to work with. We’ll see what happens next time…
I have more time for hobbies these days, but I keep using them for hobbies, and not for writing about hobbies. Also, M gave me a PS4 for Christmas and Horizon Zero Dawn is amazing! Grin. So that’s a factor. And finally, while I haven’t posted in a while, it might be in part because one of the blogs I occasionally check out introduced me to Gaslands. Post-apocalyptic death races played out using modified toy cars. I’ve played two games now, and I’m hooked (although, let’s be honest, I was 70% hooked before I’d ever laid template to mat). But let’s start at the beginning.
As I said, I saw mention of Gaslands on Steinberg Shed Space and immediately got excited about the concept. A fresh new Car Wars? Already scaled for Hot Wheels? I decided I should at least try to find somebody else to try it out, so I don’t just end up painting a bunch of models and never using them (fingers crossed, Saga! one of these days!). I outlined the basic concept to my friend CP, she was immediately sold on the idea, and so I ordered 2 books instead of one. I hit up the downloads section of gaslands.com and started putting some cars together based on the rudimentary knowledge I could glean from the build side of the quick reference card.
I selected the Gaslands rulebook as my staff pick at work (picking a gamebook seemed weird, but what the hey), and then I built some more.
I’ve raided the bits bins at the local shop a few times to bulk out my own bits supply now, and eventually our books arrived. I read through it and we set a date for our first test game.
We were now both totally committed to this one. CP had live-posted her way through our game (those are some of her black and white photos above) and netted us a whole pile of additional interest, along with a number of admirers for my modified taco truck. People started asking about it, and now we’ve got a 16-member facebook page for local players… which brought me to my second game; Demo Night at the shop.
Had 4 people take part in the first stage of a race, and several more checked it out and asked questions; I’ll probably do at least one more demo session before we set up a regular Gaslands night. I broke my various builds down into several 50-can teams of 2 cars each so that people could play before having to build anything, but everybody that played was similarly pumped about the building part of it, and so everybody had cars ready to go. I only took one picture (one of these days I’ll improve!); it’s pretty much the second shift phase of the game. Note to self, don’t make people corner right away.
The hobby time that I’ve spent lately has mostly been building, with a little painting mixed in, but I think I’m going to make that into a post of it’s own.