Back in late November, I painted a Freebooter’s Fate amazon and promised another would follow. Perhaps this looks familiar?
Occepa’s on the right…
I actually got Occepa almost done, but then got sidetracked with other projects. She’s been sitting, partly finished, at the edge of my workspace. Taunting me a little. So tonight I finished her up. We’ll start at the beginning, though.
Occepa is a brilliant if awfully fidgety miniature. Lots of individual bits and pieces takes in a very cool model, but also lots of tiny crevasses and hard to reach surfaces.
She also looks gloriously sturdy. This is a woman you could imagine donning crocodile armour and washing into a melee. I did a lot of paint mixing for this one, so I don’t remember what all of the various painted were that I used, but that’s my old standby Vallejo Red Leather.
Try to imagine the process of painting the underside of that tail and the back of her ‘skirt’. Ugh.
Getting to the mouth and hair here. Finally very little primer showing (mostly in this aforementioned nooks and crannies).
That crocodile head ‘helm’ is huge, and definitely limits the angles from which you can even see her face. This is the point at which I’d left off before. I suspect I had a way and some drybrushing done, but it’s not very clear where I’ve started and the other begins, so I did those aspects all over again tonight.
You see? From the wrong (or right?) angle, she looks more like an anthropomorphic croc. This time around I drybrushed in a few, progressively lighter tones and I feel like it served as a nice halfway point between basic drybrushing and highlighting (still not a big fan of highlighting, especially where my own miniatures are concerned).
I did a tiny bit of highlighting after this, but this is pretty much the finished product. Occepa is finished, and will now be entered into the local shop’s monthly painting contest, where she’ll remain on display for the next couple months convincing people (I hope) to check out these Frostgrave games.
Until next time! (I have a bunch of half finished entries here so hopefully it shouldn’t take too long!
First two Freebooter Amazons to be painted will be one of the Atl-Atl pair, and Occepa; today I’ll be focusing on the former. I expect Occepa’s crocodile armour will take a bit more time and energy and I wanted to get one of these finished for this month’s Paint the Thunder painting competition, so Atl-Atl #1 will be painted first.
Initially I was thinking I’d work on them simultaneously, so the base flesh coat can be seen here on both of them.
I’m making use of Vallejo’s Red Leather quite a bit for the armour on this one; I’m a big fan of the colour and use it a lot, which I like to think has the unintended side-effect of bringing my warbands together. Like they all shop at the same armourer, haha. My minor focus on Frostgrave over the last year or so has resulted in me having more varieties of blue than in most other colours, so I’ll be making use of those as well. I also just really like using the blues; they generally look pretty good on most models, and seem like a colour set that’s not impossible in a fantasy setting. Of course, in a fantasy setting, I suppose *any* colour is reasonable… you just need to tailor the setting to provide the dyes. Grin. Still…
Skin tone is a Vallejo Medium Flesh (it generally feels darker to me than the Dark Flesh does, but maybe that’s just me), with Vallejo Charcoal grey for the hair. I’ve been liking it as an alternative to black, because it darkens well with a wash, while still retaining some depth, which avoids me having to try and build depth with drybrushing and/or highlights, which I don’t feel very strong at (especially where hair is concerned).
My initial washing effort involved a Vallejo Skin Wash, which seemed insanely dark. I always think I’m going to like it, and maybe if I did a lot more highlighting as part of my process I would, but it was just so much darker than expected. Even then, it would probably have worked just fine, but it’s also redder than I think I expected. I might try it with one of my other Amazons – like I said, I feel like it should work for them – but it just looked too much like the Red Leather (oh, that left foot!), which sort of muddled the entire paint scheme. Ended up going with the old standby, Citadel Reikland Fleshshade, and I feel good about the result. I did make use of the Skin Wash for the armour, and I really liked the result I got there. The Vallejo washes are significantly more intense, and I’m never quite prepared for what I get when brush first hits model. What I probably really need to do is just sit down with some miniatures I *don’t* care so much about and get in some practice.
The base is Citadel Stormvermin Grey, I think, washed with Citadel Agrax Earthshade and drybrushed with Citadel Flayed One Flesh. I used some Vallejo Dark Green (I think?) wash to add a bit of colour and depth afterward.
Close enough for my first Freebooter Amazon, I think. I’m not very good at taking pictures of the process, am I? Once I get painting I just don’t really think about it, and there are way better painters than me out there providing tutorials. Ha. Nonetheless, I am writing a blog so I’m trying to provide a little more detail in case something I’ve done actually does grab you. No reason to make it impossible to suss out. Next time: Occepa!
In anticipation of Frostgrave: Ghost Archipelago, I’ve been browsing around for fun and appropriate miniatures I wouldn’t generally have a use for. Freebooter’s Fate came up in one of my searches; I was leaning pretty hard into the Amazons. Shipping them was going to be a pricey option and the shop I’m at doesn’t have any easier access than I do, so I did some research and lined up a couple destinations to hit up while I was in Toronto a couple weeks ago. They had most of what appealed to me in stock, so I spent some moneydollars and got me some Amazons.
First off, they come with interesting bases. Square plastic bases with a recess that holds a molded metal piece. I was originally planning to put these minis on round bases, but these looked interesting enough that I decided to give them a shot. Annoyingly, they stick out significantly as is, as they’re a little taller and wider than really fits in the recess. This might be intentional (I suppose I could have glued them in place and then used green stuff to bevel/fill the base edges), but I opted to trim and file them until they fit in nicely, generating a little more of a defined edge.
The first one I put together was Canita, who stands on one leg and has a sizable headdress of sorts. The mounting hole in the molded metal base piece was a little on the large side, so I had to green stuff her into place. Unfortunately she’s pretty top heavy, so I had to get creative to keep her aligned (she kept falling over when left vertical).
Next up was a paired set which went pretty smoothly. I pinned the limbs (most of these Amazons are pretty slender, so the majority of these minis were pinned with staples) and the feet fit much more snugly into the base piece. Chicomeh and Matqueh complete.
The Atl-Atl pair is what things got frustrating again. The miniatures themselves are very clean, super minimal moldlines and almost zero flash. Unfortunately, every time a piece is attached to the ‘sprue’, it’s attached at a joint (you can see this in the initial Canita image as well). This means a whole mess of garbage metal in all the spots you desperately need to fit together cleanly. By the time I’d trimmed, filed, and cleaned a given part, I was left with some annoying gaps.
Given how many parts these are (Occepa is a *7 piece* miniature), this got old fast. Fortunately a lot of the pieces were arms, hair, and other forgiving joints, but it would have been far nicer to see the flash/sprue on the actual part, where I can clean and file it without obliterating crucial surfaces.
The end results generally looked great, but required a little more work to make fit properly than I think they should have. The arms had bumps and divots at the joints to allow for solid non-pinned connections, but then there’d be so much garbage metal burying the ‘bumps’ that it served zero real purpose anyway. I always ended up filing and pinning anyway.
Occepa is my personal favourite. She’s big and powerful, and wears armour made from a crocodile. But 7 pieces! Arrgh! Torso/legs, left arm (shield), right arm (hand weapon), hair, upper croc jaw, lower croc jaw, and croc tail.
Part of me was pretty tempted to paint some parts before assembling, but I ended up deciding that with this many finicky parts, I’d be better off putting everything together first, so I could be a little rougher during the process.
Painting is going to be a pain, but I’ll figure it out, no doubt. Lots of the trouble spots are going to be pretty hard to see, anyway. The tail and loincloth covers a lot, and the shield blocks much of her left side. Frustrating as I expect all aspects of this to be, though, I am super excited about it. I never realized I needed this miniature until I put it together, and now I want a dozen like it. It’s going to look great!