So. Unlike the Maverick from the USARF box set, the pair of Mavericks come with little cargo containers that hang off the rear of the bikes. While they’re actually designed to have a fair amount/variety of surface contacts, they still struck me as pretty doomed without a bit of help, so I broke out the pinning gear again.
Look at these monsters…
The 3-surface bond actually made pinning a little trickier because it meant each surface was a little smaller, but left me feeling really good about how solid the joins are now that they’re done.
And who am I kidding? I was always going to be pinning this miniature…
I cannot picture these exhausts staying attached otherwise.
With all the finicky stuff out of the way, they do of course shape up into great looking units.
Personally, I particularly like this one, the fellow reaching for his sidearm. It’s such a dynamic pose that I was actually surprised not to find a heavy pistol in the profile.
The resin bases are from Antenocitis Workshop, purchased through Warsenal a while back. I went to look into getting some more (the USARF box set means I have 5 bikes, and I only have the 4 forest bases), and I guess Warsenal has been clearing out the AW stuff; the 55mm bases were extra cheap so I snapped up another forest set and a badlands set. While I was at it I grabbed a set of 6 ‘Access Terminals’ that I’ve been eyeing for years. Definitely happy with those.
Simple but effective, and they seem a lot sturdier than the fancier stuff we’d grabbed in the past.
Back to the forest bases. They look great, but the level of detail makes them pretty brutal to get paint coverage onto them. Lots of hard to reach nooks and crannies, but they pick up drybrushing like nobody’s business.
(That’s a Desperado and the USARF Maverick, I haven’t washed/primed the bases for the new ones yet, since I was waiting on that order to come in before I could base both of the ones from the boxed pair).
This guy consists of some *very* big chunks of metal. There is definitely some pinning involved in this, and i’m leaving some parts off for now.There are front and back armour ‘plates’ that will get added later but i’m holding off as there are some large paintable details on the back side of those. I’m sure this thing will be awkward enough to paint as it is. That right arm with the guns is big enough that I can barely place that back armour plate as it is.
The pieces for this desperado were trimmed and cleaned up about the same time as the other one; he’s just been sitting in a box waiting for me to be in the mood. That finally happened the last week. A while back, my youngest son found his way into my workspace, and managed to knock a whole bunch of prepped and cleaned – but unassembled – infinity miniatures onto the floor. 2 grunts, this desperado, the dismounted maverick, and a couple others. Between one of those mottled rugs that hide everything you spill on them, loose hardwood flooring with very wide cracks, and the space just generally being overpacked with random hobby stuff, it took me a long while to find everything… almost everything. One Grunt arm stayed missing. This was probably a year or more ago now.
Recently I was tidying up some of the random pile of hobby junk, and decided to really search every square inch of the space in the hopes of turning up that arm. At one point I reached into a bag of Atari cartridges and similar stuff and pulled out a plastic bag full of 72-pin connectors and other loose NES parts. I emptied the bag, but didn’t see anything. This is the part where my desperation really began to show; I reached in and pushed out the corners of the bag, and broke out my flashlight… and there it was! The missing arm!
The downside of this discovery is that I promptly abandoned by cleaning efforts, but I was also overcome with the desire to build infinity models so I’m calling it an overall win (and thus began sudden burst of assembling unbuilt models).
There’s a fair but of pinning in this one, although less than my previous Desperado (I’m giving the gorilla glue a little more credit these days, now that I’ve got more use under my belt). The big example is the exhaust. I have no idea how anybody thinks that thing will stay on without some serious help, so it’s pinned at the tire edge. Pretty sure I also pinned that little crosspiece that runs through the bottom of the bike (little footpedal things? I’m obviously a real bike expert…); it seems like something that shouldn’t need pinning, but it’s just a little too loose in that hole and doesn’t want to stay where it belongs. I had the same experience with the first one, months ago.
There’s also a pin in his butt, that’s not currently glued into the seat, so that I can more easily paint him separately and attach him later.
Some of these are less in focus than others, but there you have it. My first Infinity building blast in a while, including my Outrage sniper whose name starts with a K. Can I just say I really enjoy how Infinity miniature generally piece together really well? I think I take it for granted sometimes, but the whole process just goes so much smoother than with some other stuff. More on that when I eventually get around to telling you about my recent Freebooter pickups.