Tagged: meyers Manx

Gaslands – 50pt Death Race Duel

Another Death Race this week. Decided to run 50pts this time instead of 60 to put a little more crunch into the build process. B brought a truck and a buggy, both tricked out with turreted HMGs and extra armour. I brought a performance car and a buggy with lesser armaments but more tricks. Big Tires, Hell for Leather, lots of nitrous, all sponsored by Idris.

The starting lineup.

I was right fast, but messy as hell. He was slower but a lot cleaner.

Turn 1, Gear Phase 1

I started with a pair of Hell for Leather induced Long/Slide/Spins. Bad news hazard-wise, but got me an early jump and a couple audience votes.

Turn 1, Gear Phase 2

I followed up with a similar second phase (long/slide/spin for the Road Runner and a clumsy nitrous boost for the Manx), but both cars ended up wiping out. Even with the Big Tires, the treacherous terrain put me up over the line.

Turn 1, Gear Phase 3

I used my 4 audience votes to pop both cars into 3rd and keep going. Decent plan for the buggy (it got itself back into the race), but a stupid mistake for the Road Runner. Its best option was a 3rd gear hairpin through that treacherous terrain, and the dice were not on my side. It wiped out again, flipping this time for some extra distance.

Turn 1, Gear Phase 4

The Manx managed to gain a little ground without crashing into his teammate, but that was about it. We were both rolling pretty terribly during this match. B’s truck and buggy continued to prove the value of slow and steady.

Turn 1, Gear Phase 5

The Manx wiped out again, but not before covering a decent bit of distance. This time it was its turn to flip for an extra few inches.

This bright is to the end of Turn 1; B’s team also had some bad rolls and neither got out of 4th gear.

Turn 2, Gear Phase 1

Snapped that photo a little early, apparently, so I added the Manx’s movement. It tucked nicely into the high – risk shortcut that I built into the second corner (I put one of these in the first game I played with C, and it made for some hilarious levels of mayhem).

The Road Runner’s reverse turn fell apart when I misjudged the size of the slide template and wound up sitting next to a bunch of exploding barrels. My spin would no longer get me where I needed to be, so instead I used it to line up a shot. Now I’d be going into the 2nd phase still facing the wrong way.

Turn 2, Gear Phase 2

The Manx cleared the shortcut, but wiped out in the process. The Road Runner got in a ram, but at this point was surrounded by turreted HMGs that were starting to come on line as they crossed that first gate.

Turn 2, Gear Phase 3

At this point the Manx was stuck in first and the Road Runner was taken apart by multiple HMGs. B’s truck and buggy continued their advance.

Turn 2, Gear Phase 4

Further sitting for the Manx, and B’s cars/HMGs drew ever closer. They were still in 4th gear, so this brought Turn 2 to a close.

Turn 3, Gear Phase 1

This is it, my bitter end. Forward wasn’t an option this time and even a short reverse left me in the turret-path of B’s advancing buggy. He told some 6’s, and I didn’t. With only the two of us playing, we didn’t bother with respawns, so this was the game.

That’s two Idris losses in a row for me. I think I’m getting overly hung up on trying to maximize certain aspects while ignoring other factors. Hell for Leather is certainly a way to generate Idris audience votes, but a bike can do the same thing for the same points, and is a whole extra vehicle. An HFL monster truck can use it to more easily trample/clear other vehicles, but cars are just getting a couple of template boosts. The free shift results coming out of the medium template are probably worth using it instead (I was picking up so many hazards I ended up using all my votes just to stay in the game anyway).

Weapons are the other issue here. I wanted more points for perks, so I avoided turreting any weapons, but I was so far ahead that my front facing HMG was generally useless and it was hard to find a good opportunity to drop caltrops.

I’ll have to give some more thought to future builds. The Manx wasn’t bad (although the HFL points would be better spent elsewhere) but the Road Runner was pretty much a hodgepodge of mismatched ideas (admittedly I just wanted to field that build because I like how it looks, which might not have been a very strategic plan, haha).

Until next time, here’s a final shot of this crew:

Advertisements

Gaslands – Meyers Manx

My latest start-to-finish project is a Hot Wheels Meyers Manx. It’s actually my second Manx; the first I left pretty much stock.

Meyers Manx I

Other than popping some Stan Johansen figures into it, I haven’t done much. I expect I’ll paint the figures (and seats) at some point, but I don’t expect I’ll do much beyond that. It looks fun as is, so why change anything?

The new one was a little beat up, with the roll bar missing and the windshield broken so it seemed like a great opportunity to go nuts. What better place to start than a wheel swap?

The wheels came off a Matchbox MBX 4×4 with ‘Panthera Trackers’ emblazoned across the hood. It will become a wreck. Obviously there was no way those wheels were going to fit in the original slots. Not only were the wheel wells too shallow, but I had to alter the wheelbase as well; I opted to cut new slots on the outside with a hacksaw.

This let me keep the axles intact. They nestled into place quite well, and I used some green stuff to secure them afterwards.

I also added a bit of plating to cover the windshield gap and the missing roll bar, and gave the car a matt varnish in preparation for painting. Primer followed close behind.

For crew I used a couple of Ramshackle miniatures. I’m not a huge fan of the resin he uses (it’s very brittle and I found it more awkward to work with than other resins), but apparently it’s one of the reasons he can keep his prices as low as they are, so I’ll make do. They looked pretty decent once they were painted up, especially considering how tiny they are. There’s not a lot of room in the Manx; I actually had to trim some of the dashboard off in addition to the steering wheel, just to get the driver to fit. Had to trim his steering wheel back as well.

I also added some extra exhausts to the car (they came off some weird little dollar-store-looking garbage car that I got in a thrift baggie). I almost added an oversized engine block poking through the hood before I remembered the engine is in the back. The car itself got a Vallejo Turquoise paint job (no idea why I bother, haha), and a combo of GW’s Agrax and Reikland are used for a wash layer. Looked pretty rough at that point, but I was planning to rust this one pretty heavily so it wouldn’t be a big issue in the long run.

Look at these little monsters!

This brought me to the rust/dirt portion of the project. Some matt medium mixed with my favourite Vallejo pigments, followed with some of GW’s Agrellan Earth for dirt and dust, and we’re ready to go!

And for easy comparison, here’s a before and after using a stock photo; in really happy with how this little fellow turned out. Manx II is ready to rumble!